Programming a Personal Entry Code
To create your own personal entry code:
1. Enter the factory-set code.
2. Press the
1
•
2
on the keypad within five seconds.
3. Enter your personal 5-digit code. You must enter each number within
five seconds of each other.
4. For memory recall feature, enter the sixth digit
1
•
2
to store driver 1
settings or
3
•
4
to store driver 2 settings.
Note:
Pressing
5
•
6
,
7
•
8
, or
9
•
0
keypad numbers as a sixth digit will
not recall a driver memory setting.
Note:
The factory-set code cannot be associated with a memory setting.
5. The doors will lock and then unlock to confirm that programming is
complete.
You may also program a personal entry code through the MyFord Touch
or MyLincoln Touch system. Refer to the
MyFord Touch
or
MyLincoln
Touch
chapter.
Tips:
•
Do not set a code that uses five of the same number.
•
Do not use five numbers in sequential order.
•
The factory-set code will work even if you have set your own personal
code.
Erasing a Personal Code
1. Enter the factory-set 5-digit code.
2. Press and release
1
•
2
on the keypad within five seconds.
3. Press and hold
1
•
2
for two seconds. This must be done within five
seconds of completing Step 2.
All personal codes are now erased and only the factory-set 5-digit code
will work.
Locks
75
2014 MKX
(mkx)
Owners Guide gf, 1st Printing, November 2013
USA
(fus)
