Replacing license plate lamp bulbs
1. Make sure the headlamp switch is in the off position.
2. Remove the two screws and the
license plate lamp assembly from the
bumper.
3. Carefully pull the bulb straight out
from the lamp assembly.
4. Install new bulb(s) in reverse
order.
BULB SPECIFICATION CHART
Replacement bulbs are specified in the chart below. Headlamp bulbs
must be marked with an authorized “D.O.T.” for North America and an
“E” for Europe to ensure lamp performance, light brightness and pattern
and safe visibility. The correct bulbs will not damage the lamp assembly
or void the lamp assembly warranty and will provide quality bulb burn
time.
Function
Number of Bulbs
Trade
Number
Headlamp low/high beam
(halogen)
2
HIR2
* Headlamp low/high beam
(HID)
2
D3S
* Front sidemarker lamp
N/A
LED
Front park/turn signal
lamp
2
3457NAK
(amber)
* Rear sidemarker lamp
N/A
LED
* Stop/tail/turn lamp
N/A
LED
Backup lamp
2
921
License plate lamp
2
C5W
* High-mount brake lamp
N/A
LED
Fog lamp (if equipped)
2
H11
Maintenance
271
2014 MKX
(mkx)
Owners Guide gf, 1st Printing, November 2013
USA
(fus)