POWER ADJUSTABLE FOOT PEDALS
The accelerator and brake pedal
should only be adjusted when the
vehicle is stopped and the gearshift
lever is in the P (Park) position.
Press and hold the rocker control to
adjust accelerator and brake pedal.
•
Press the top of the control to
adjust the pedals toward you.
•
Press the bottom of the control to adjust the pedals away from you.
WARNING:
Never adjust the accelerator and brake pedal with
feet on the pedals while the vehicle is moving.
POWER DEPLOYABLE RUNNING BOARDS (IF EQUIPPED)
Deployable running boards (DRB) automatically move when the doors
are opened to assist entering and exiting the vehicle.
Automatic power deploy:
•
The running boards will extend
down and out when the doors are
opened.
Automatic power stow:
•
The running boards will return to
the stowed position when the
doors are closed. There will be a
two second delay before the
running boards move in to the
stowed position.
Manual power deploy:
To manually operate the running boards, refer to the
Message center
in
this chapter.
•
This feature can manually set the running boards in the deployed
position for access to the roof.
•
When running boards are manually set in the deployed position
<OUT>, the boards will return to the stowed position and enter
automatic mode when the vehicle speed exceeds 5 mph (8 km/h).
2009 Navigator
(nav)
Owners Guide, 2nd Printing
USA
(fus)
Driver Controls
99
