Lincoln 2009 MKX Скачать руководство пользователя страница 115

Страница: 115 / 308

Climate controlled seats air filter replacement

The climate controlled seat system includes air filters that must be
replaced periodically. Refer to the

scheduled maintenance information

for more information.

•

There is a filter located under
each front seat.

•

The filter can be accessed from the first row seat. Move the front
seats all the way back and up to ease access.

To remove an air filter:

1. Remove key from ignition.

2. Push up on the outside rigid edge
of the filter until the tabs are
released, then rotate the air filter
toward the front of the vehicle.

3. Remove filter.

2009 MKX

(mkx)

Owners Guide, 1st Printing
USA

(fus)

Seating and Safety Restraints

114

Содержание 2009 MKX





















































































































































































































































































































Результаты поиска

Содержание 2009 MKX

Отзывы:

Похожие инструкции для 2009 MKX

Бренды по названию

Популярные бренды

Lincoln 2009 MKX, Руководство пользователя

Результаты поиска

Содержание 2009 MKX

Отзывы:

Похожие инструкции для 2009 MKX

Бренды по названию

Популярные бренды