Webbing extraction sensitive mode
The webbing sensitive locking mode locks the webbing and prevents
more belt from being pulled out if the belt is pulled out too quickly. The
belt will unlock when you stop pulling on it.
Automatic locking mode
How to use the automatic locking mode
•
Buckle the combination lap and
shoulder belt.
•
Grasp the shoulder portion and
pull downward until the entire
belt is pulled out.
•
Allow the belt to retract. As the belt retracts, you will hear a clicking
sound. This indicates the safety belt is now in the automatic locking
mode.
When to use the automatic locking mode
In this mode, the shoulder belt is automatically pre-locked. The belt will
still retract to remove any slack in the shoulder belt. The automatic
locking mode is not available on the driver safety belt.
This mode should be used
any time
a child safety seat, except a
booster, is installed in passenger front or rear seating positions. Children
12 years old and under should be properly restrained in a rear seating
position whenever possible. Refer to
Safety restraints for children
or
Safety seats for children
later in this chapter.
2009 MKX
(mkx)
Owners Guide, 1st Printing
USA
(fus)
Seating and Safety Restraints
126