Lincoln 2008 MKX Скачать руководство пользователя страница 22

Страница: 22 / 329

Occupancy mode (if equipped):

Use

to select and optimize

sound for ALL SEATS, DRIVERS SEAT or REAR SEATS.

Compression:

Available in CD mode, this feature brings soft and loud

CD passages together for a more consistent listening level. Press MENU

until compression status is displayed. Press

to turn the feature

on/off.

SINGLE PLAY/DUAL PLAY (if equipped):

If SINGLE PLAY is ON,

press

for DUAL PLAY. For further information on Single

Play/Dual Play, please refer to the

Family Entertainment DVD system

later in this chapter.

Select:

These controls are used

in Menu mode to select various
settings/options.

Play/Pause: In CD/MP3 mode,

press to pause the playing media.
CDX PAUSE will appear in the
display. Press again to return to the playing media.

OK:

Use in various menu selections. Your vehicle may be equipped with

SYNC which has special phone and media features. For further
information, refer to the

SYNC supplement.

SEEK

In radio or CD/MP3

mode,

press to access the next

strong station or track.

In satellite radio mode (if equipped)

, press SEEK

to seek to the

next channel. If a specific category is selected, (Jazz, Rock, News, etc.),
press SEEK

to seek to the next channel in the selected category.

Press and hold SEEK

to fast seek through the next channels.

In TEXT MODE,

press SEEK

to view the additional display text

when “>” is active in the display.

In CATEGORY MODE,

press

to select a category.

Satellite radio is available only with a valid SIRIUS subscription.
Check with your authorized dealer for availability.

FWD (Fast Forward):

Press

FWD to manually advance in a
CD/MP3 track.

2008 MKX

(mkx)

Owners Guide (post-2002-fmt)
USA

(fus)

Entertainment Systems

Содержание 2008 MKX










































































































































































































































































































































Результаты поиска

Содержание 2008 MKX

Отзывы:

Похожие инструкции для 2008 MKX

Бренды по названию

Популярные бренды

Lincoln 2008 MKX, Руководство пользователя

Результаты поиска

Содержание 2008 MKX

Отзывы:

Похожие инструкции для 2008 MKX

Бренды по названию

Популярные бренды