Lincoln Electric PIPEFAB CE, Руководство оператора, Страница: 78 / 100

PIPEFAB™ WELDING SYSTEM OPERATION
B-27
USER INTERFACE PROGRAMMING
- Connect the 5-pin control cable from the wire feeder to the 5-pin connector on the PipeFab™
power source.
- Turn on the power to the wire feeder and wait for the ini � aliza � on sequence to complete.
-
Insert the USB s � ck into the USB port on the user interface.
- A message will appear asking if you want to perform a Display So � ware Update. Turn the center
knob to highlight “Yes” in red. Press the center knob to start the update.
- Once a message appears sta � ng display updated successfully, the unit will restart and return to
a typical welding screen.
- Remove the USB s � ck from the USB port.
New user interface so � ware can be found at powerwaveso � ware.com.
WAVE CONTROL
TABLE B.2
PROCESS
WAVE
CONTROL
NAME
EFFECT /
RANGE
DESCRIPTION
STICK ARC FORCE
SOFT (-10.0)
TO CRISP
(10.0)
ARC FORCE ADJUSTS THE SHORT CIRCUIT CURRENT FOR
A SOFT ARC, OR FOR A FORCEFUL, DRIVING ARC. IT
HELPS TO PREVENT STICKING AND SHORTING OF
ORGANIC COATED ELECTRODES, PARTICULARITY
GLOBULAR TRANSFER TYPES SUCH AS STAINLESS AND
LOW HYDROGEN. ARC FORCE IS ESPECIALLY EFFECTIVE
FOR ROOT PASS ON PIPE WITH STAINLESS ELECTRODE
AND HELPS TO MINIMIZE SPATTER FOR CERTAIN
ELECTRODES AND PROCEDURE AS WITH LOW
HYDROGEN, ETC.
MIG AND
FCAW
PINCH
SOFT (-10.0)
TO CRISP
(10.0)
PINCH CONTROLS THE ARC CHARACTERISTICS WHEN
SHORT-ARC WELDING.