8695 4598 / G
C - DESCRIPTION OF ASSEMBLING IN PLASMA CUTTING PROCESS
CPM 400-450-600wi
C-47
There are two possibilities for assembling consumables on the torch
CPM600
wi
.
1. from 60 to 240 A
2. 300 A and more, type W4
from 60 to 240 A
300 A and more, type W4
Proceed in the following order to fit the torch with the consumables defined in the cutting tables.
Continue as follows to install the consumables in the torch.
Moderately
tighten the M55 immersion pipe using a 4-
mm Allen key.
To fit the consumables in the torch, it is necessary to lubricate some parts. The grease must not exceed the
area to lubricate. The thickness must be as fine as possible. Apply a small quantity of grease to the end of
your index and turn your finger around the area to lubricate. Use only M8 grease supplied by
LINCOLN
ELECTRIC
, because it is compatible with oxygen (risk of torch combustion). Wipe your finger before any
contact with or handling of other parts.
NEVER APPLY GREASE ON THE GAS DIFFUSER.
