8695 4598 / G
C - DESCRIPTION OF ASSEMBLING IN PLASMA CUTTING PROCESS
CPM 400-450-600wi
C-35
There are three possibilities for assembling consumables on the
CPM450
torch for cutting stainless steel.
1. 20 to 120 A
2. 200 A
3. 280 to 400 A
Continue as follows to install the consumables in the torch. Install the M11 immersion pipe using a 3-mm Allen key.
To install the consumables in the body of the torch, you may need silicone grease (M8). Use only a small quantity
of grease - a fine film is all that is required. Use the grease supplied with the torch.
Never apply grease on the gas diffuser.
