Lincoln Electric IM10263, Руководство оператора

Страница: 9 / 24

B-2
OPERATION
Channel seleCtion
In addition to being properly paired, the pedal and receiver must
be set to the same channel in order for communication to take
place. The
rotary DIP SWITCH sets which of the 12 channels
within the 2.4GHz band the system will communicate on. If
multiple systems are operating within the same vicinity, it is
recommended that each is operated on its own channel to
improve performance.
It is important to note that each pedal is factory programmed with
a unique ID. A receiver is programmed to respond ONLY to the
pedal in which it is paired.
Selecting Channel (Pedal):
(See figure A.4)
1. Remove the plug cover on the bottom of the pedal.
2. Select the desired channel . Note: only the first 12 channel
positions can be used. The remaining positions are reserved for
future use. If one of the unassigned positions are selected, the
pedal/receiver will not function.
3. See selecting channels on the receiver.
FIGURE A.4
Selecting Channel (Receiver):
(See figure A.5)
1. Remove the 4 screws on the back of the receiver and remove
the cover.
2. Select the desired channel . Note: only the first 12 channel
positions can be used. The remaining positions are reserved for
future use. If one of the unassigned positions are selected, the
pedal/receiver will not function.
3. After channels have been set to the same desired channel, see
next step Pairing the Pedal/Receiver.
FIGURE A.5
WIRELESS TIG FOOT PEDAL
0
BACK COVER REMOVED
TO SET DESIRED CHANNEL.
0
Plug cover removed Set desired Channel.