Lincoln Electric IM10263, Руководство оператора

Страница: 12 / 24

B-5
OPERATION
diagnostiC mode
The system’s range is maximized with a clear line of sight to the
power source. Other factors such as heavy RF activity within the
pedal’s vicinity can also affect performance.
The diagnostic mode will provide a qualitative analysis of the
system’s communication. In this mode, the battery strength
indicator will change to illuminate BLUE, and blink at a rate of 20
times per second to indicate uninterrupted communication. An
intermittent blinking rate would suggest a heavily congested
environment, or that the pedal and receiver are approaching their
maximum operating distance. (See figure A.10)
Entering Diagnostic Mode:
(See figure A.11)
1. Remove the 4 screws on the back of the receiver and remove
the cover.
2. Set DIP SWITCH #2 on the receiver board to “ON.”
3. Replace cover.
WIRELESS TIG FOOT PEDAL
BACK COVER REMOVED
AND SCREWS FOR CLARITY.
SET DIP
SWITCH #2
TO ON
ON
OFF
1 2
FIGURE A.11
FIGURE A.10
BATTERY STRENGTH
BLUE LED INDICATOR
TWO GREEN
LEDS
diP switCh FunCtions
Each pedal and receiver has a 2 position dip switch and a 16
position rotary dip switch. The functionality of each is as follows:
PRINTED CIRCUIT BOARD
Pedal Receiver
Dip Switches Dip Switches
Mode of Operation #1 #2 #1 #2 Details/Function
Control off off off off Normal Transmission
Diagnostic off off off on Communication strength metric
Configure on x on x Pairing Procedure
Calibration x on x x Set/Clear dip at maximum stroke
X-NA