Lincoln Electric Cruiser K3048-1, Руководство оператора, Страница: 44 / 57

B-12
OPERATION CRUISER TM
P.100
View Diagnostics
Diagnostics are only used for servicing the Power Wave system.
Yes = Shows P.101 through P.500 in the SETUP menu.
No = Only P.0 through P.100 are shown in the SETUP menu.
P.101
Event Logs
Press the right MSP4 button to view the Event Logs. Rotate the encoder to
select the object to read and then press the right MSP4 button. Various
software information will appear about key system events.
Press the left MSP4 button to exit.
PARAMETER DEFINITION
P.102
Fatal Logs
Press the right MSP4 button to view the Fatal Logs. Rotate the encoder to
select the module to read and then press the right MSP4 button. Various
software information will appear about critical module actions.
Press the left MSP4 button to exit.
P.103
Software Version
Press the right MSP4 button to view the software loaded into each module
(p.c. board). Rotate the encoder to select the module to read and then
press the right MSP4 button. The panel will display the main software ver-
sion loaded into the module. Press the left MSP4 button to exit.
P.104
Hardware Version
Press the right MSP4 button to view the hardware version of each module
(p.c. board). Rotate the encoder to select the module to read and then
press the right MSP4 button. The panel will display the main hardware ver-
sion loaded into the module. Press the left MSP4 button to exit.
P.105
Welding Software
Press the right MSP4 button to view the welding software version inside the
power source. Press the left MSP4 button to exit.
P.106
Ethernet IP Address
Press the right MSP4 button to view the IP address of the Ethernet board.
If no Ethernet Board is installed, the display shows “No Enet Found.” Press
the left MSP4 button to exit.
P.107
Power Source
Press the right MSP4 button to view the type of power source connected to
the control box. Press the left MSP4 button to exit.
P.500
Parameters that are P.500 and higher are only accessible with Weld
Manager. See Weld Manager documentation for details.