Lincoln Electric Cruiser K3048-1, Руководство оператора, Страница: 33 / 57

SAFETY PRECAUTIONS, OPERA-
TION
The serviceability of a product or structure utiliz-
ing the welding programs is and must be the sole
responsibility of the builder / user. Many variables
beyond the control of The Lincoln Electric
Company affect the results obtained in applying
these programs. These variables include, but are
not limited to, welding procedure, plate chemistry
and temperature, weldment design, fabrication
methods and service requirements. The available
range of a welding program may not be suitable for
all applications, and the build / user is and must be
solely responsible for welding program selection.
B-1
OPERATION CRUISER TM
ELECTRIC SHOCK can kill.
• Turn the input power OFF at
the disconnect switch before
working on this equipment.
• Do not touch electrically hot
parts.
• Only qualified personnel should install, use or
service this equipment.
• Do not allow parts at electrode potential to touch
the tractor frame, cress slides, base flux hopper
or other parts.
• Disengaging the clutch does not stop the weld-
ing arc.
• Always wear dry insulating gloves.
------------------------------------------------------------------------
WARNING
MOVING PARTS can injure.
• Do not leave the tractor unat-
tended while it is welding or
traveling.
• Electrode reel, drive rolls and
wire straightener rolls turn
during welding or inching.
• Keep gloved hands away from rotating parts.
• Keep away from pinch points.
• Do not place the tractor on inclined surfaces with
the clutch disengaged.
• Only qualified personnel should install, use or
service this equipment.
------------------------------------------------------------------------
WARNING
GRAPHIC SYMBOLS