Lincoln Electric AIR VANTAGE 500, Руководство оператора, Страница: 27 / 53

C-1
ACCESSORIES
C-1
VANTAGE® 500 DEUTZ
OPTIONAL FIELD INSTALLED ACCES-
SORIES
K802N POWER PLUG KIT - Provides four 120V plugs rated at 20
amps each and one dual voltage, full KVA plug rated at
120/240V, 50 amps. 120V plug may not be compatible with NEMA
common household receptacles.
K802-R POWER PLUG KIT - Provides four 120V plugs rated 15
amps each and one dual voltage, full KVA plug rated at
120/240V, 50 amps, 120V plug is compatible with NEMA common
household receptacles.
K857 25 ft. (7.5 m) or K857-1 100 ft. (30.4 m) REMOTE CON-
TROL
- Portable control provides same dial range as the output
control on the welder from a location up to the specified length
from the welder. Has convenient plug for easy connection to the
welder. The VANTAGE 500 DEUTZ is equipped with a 6-pin
connector for connecting the remote control.
K704 ACCESSORY SET - Includes 35 feet (10 m) of
electrode cable and 30 feet (9 m) of work cable, head-
shield, Filter plate, work clamp and electrode holder.
Cable is rated at 500 amps, 60% duty cycle.
K2641-2 FOUR WHEELED STEERABLE YARD
TRAILER
For in plant and yard towing. Comes standard with a Duo-
Hitch™, a 2” Ball and Lunette Eye combination hitch.
K2636-1 TRAILER - Two-wheeled trailer with optional fender
and light package. For highway use, consult applicable feder-
al, state, and local laws regarding possible additional require-
ments. Comes standard with a Duo-Hitch™, a 2” Ball and
Lunette Eye combination hitch.
Order:
K2636-1 Trailer
K2639-1 Fender & Light Kit
K2640-1 Cable Rack
K887-1 ETHER START KIT - Provides maximum cold weath-
er starting assistance for frequent starting below 10°(-12°C).
Required Ether tank is not provided with kit.
K899-1 SPARK ARRESTOR KIT - Easily mounts to standard
muffler.
K1816-1 Full KVA Adapter Kit - Plugs into the
120/240V NEMA 14-50R receptacle on the case front
(which accepts 4-prong plugs) and converts it to a
NEMA 6-50R receptacle (which accepts 3-prong
plugs) for connection to Lincoln Equipment with a
NEMA 6-50P plug,
T12153-9 Full-KVA Power Plug-
One dual voltage
plug rated at 120/240V, 50 amps, single phase.
Pipe Thawing with an arc welder can cause fire,
explosion, damage to electric wiring or to the arc
welder if done improperly. The use of an arc
welder for pipe thawing is not approved by the
CSA, nor is it recommended or supported by
Lincoln Electric.
------------------------------------------------------------------------
K2356-1 Control Panel Cover Kit- Clear plexiglass
cover to protect control panel from dirt and debris, and
to visually monitor machine operation. Lockable to
deter vandalism.
K2340-1 Lockable Fuel Cap / Flash Arrester Kit- For
use in locations where flash arrester safety is
required. Lockable fuel cap prevents tampering with
fuel. Green cap color provides a visual reminder to
use diesel when refueling.
TIG OPTIONS
K1783-9 PTA-26V TIG Torch
Air Cooled 200 amp torch (2 piece) equipped with
valve for gas flow control. 25 ft. (7.6m) length.
KP509 Magnum Parts Kit for PTA-26V TIG Torch
Magnum Parts Kit provides all the torch accessories
you need to start welding. Parts kit provides collets,
collet bodies, a black cap, alumina nozzles and tung-
stens in a variety of sizes, all packaged in an easy to
carry reclosable sack.
K870 Foot Amptrol®- Varies current while welding for
making critical TIG welds and crater filling. Depress
pedal to increase current. Depressing pedal fully
achieves maximum set current. Fully raising the pedal
finishes the weld and starts the after flow cycle on
systems so equipped. Includes 25 ft. (7.6m) control
cable.
K963-2 Hand Amptrol®- Varies current for making
critical TIG welds. Fastens to the torch for convenient
thumb control. Comes with a 25 ft. (7.6m) cable. (For
larger handle 18 or 26 series torches.)
K2535-1 Precision TIG 225 Ready-Pak
For AC TIG Welding with square wave performance
use the AC generator of the Engine-Driven Welder to
supply the power. Easy setup. Includes torch, foot
amptrol, gas regulator and hose. Requires the
K1816-1 Full KVA adapter kit.
K2350-2 Invertec® V205-T AC/DC One-Pak™ Package
For AC TIG welding with square wave performance,
use the AC generator of the engine-driven welder to
supply the power. Easy setup. Includes torch, parts
kit, regulator and hose kit, Twist-Mate™ torch adapter,
work cable with Twist-Mate end and foot Amptrol®.
WARNING