Lincoln Electric ACTIV8, Руководство оператора

Страница: 18 / 52

B-1
OPERATION
ACTIV8™
B-1
• ELECTRIC SHOCK CAN KILL.
Unless using COLD FEED fea-
ture, when feeding with gun trig-
ger, the electrode and drive
mechanism are always electri-
cally energized and could
remain energized several sec-
onds after the welding ceases..
• The work clip is energized any time the output
of the welding power source is “ON”, even
when the feeder is not welding.
• Do not touch electrically live part or electrode
with skin or wet clothing.
• Insulate yourself from work and ground.
• Always wear dry insulating gloves.
• The serviceability of a product or structure uti-
lizing the ACTIV8™ wire feeder is and must be
the sole responsibility of the builder/user. Many
variables beyond the control of The Lincoln
Electric Company affect the results obtained in
using the ACTIV8™ wire feeder. These vari-
ables include, but are not limited to, welding
procedure, plate chemistry and temperature,
weldment design, fabrication methods and ser-
vice requirements. The available range of the
ACTIV8™ wire feeder may not be suitable for
all applications, and the builder/user is and
must be solely responsible for welding set-
tings.
-----------------------------------------------------------------
• FUMES AND GASSES can be
dangerous.
• Keep your head out of fumes.
• Use ventilation or exhaust at the
arc, or both, to remove fumes
and gases from breathing zone
and general area.
-----------------------------------------------------------------
• WELDING SPARKS can cause
fire or explosion.
• Keep flammable material away.
-----------------------------------------------------------------
ARC RAYS can burn.
• Wear eye, ear and body protec-
tion.
-----------------------------------------------------------------
SEE ADDITIONAL WARNING INFORMATION
UNDER ARC WELDING SAFETY PRECAUTIONS
AND IN THE FRONT OF THIS OPERATING MAN-
UAL.
-----------------------------------------------------------------
WARNING
SAFETY PRECAUTIONS
READ AND UNDERSTAND ENTIRE SECTION
BEFORE OPERATING MACHINE.
INPUT POWER
ON
OFF
WIRE FEEDER
POSITIVE OUTPUT
NEGATIVE OUTPUT
INPUT POWER
DIRECT CURRENT
OPEN CIRCUIT
VOLTAGE
INPUT VOLTAGE
OUTPUT VOLTAGE
INPUT CURRENT
OUTPUT CURRENT
PROTECTIVE
GROUND
WARNING OR
CAUTION
U0
U1
U2
I1
I2
GRAPHIC SYMBOLS THAT APPEAR ON
THIS MACHINE OR IN THIS MANUAL