12
LINCE ITALIA S.p.A.
Table 11 - Remote control options
LED
Output
Red
Output 1
Yellow
Output 2
Green
Output 3
Yellow
Output 4 is enabled with a single press of button 2 on the remote control
NOTE
:
All remote controls have the same privileges, therefore it is not possible to differentiate them and they do not manage the
display and interrogation of the system status.
Table 12 - Siren options
Option
Description
Monitoring
Enables the device to send monitoring signals
LED ON
When the device is in alarm and battery powered, the LED lights up for 6 seconds. See product manual for details about the functioning
if WIN is connected
Local tamper
If open, the siren sounds regardless of communication with the transceiver
Advanced functions If available on the model in possession, it allows you to enable the antifoam, the anti-flame and the anti-approach systems
Beep
If enabled, a short sound is emitted by the siren at every arming and disarming
Fig. 13
4.5.7 Siren storage
The siren screen allows you to set the siren volume by choosing a value between 25% and 100% in 5% steps from the relative drop-
down menu. In addition to this, you can set the type of sound, whether type A or type B (default), and the other attributes shown in the
table below. The output (1-32) on which the siren is stored must not be connected to the control panel.
