18
LINCE ITALIA S.p.A.
Fig. 27
9. CONNECTION EXAMPLES
The diagram shown represents a typical connection to a generic wired control panel of any other manufacturer. In particular, three
wired inputs, the sabotage line and the 4 outputs of the remote control were connected by way of example. In particular, the last ones
have been connected to as many external inputs for program switching: the first three have been connected for the switching of single
programs, while the fourth can be used for total amrming.
12V 1 2 3 4 5 6 7 8
01 02 03 04 +OFF I1 I2
AL BA S AS AS
TP
12V 1 2 3 4 AS AS PR1 PR2 PR3 PRT ST
CONTROL PANEL OF
ANY BRAND
6. COMPATIBLE OPERATING SYSTEMS
The operating systems compatible with the GOLDTXRX-Soft are:
•
Windows starting from version 7;
•
Mac OS starting from version 10.12;
•
Linux Kernel starting from version 4.15.11 for X64 and from version 4.14.27 for ARM32 and ARM64.
7. MAINTENANCE AND PERIODIC INSPECTIONS
To make sure the control panel works properly, replace the backup battery every 2 years.
ATTENTION! DO NOT use chlorinated products, abrasive products or alcohol to remove particularly noticeable
dirt.
1. Clean the lid with a cloth dampened with water.
2. Then wipe with a dry cloth.
ATTENTION!
If, after storing the devices, the Transceiver is switched off or the control panel and devices are out of range, it is
recommended to remove the batteries from the devices in order to preserve their autonomy
8. DISPOSAL AND SCRAPPING
1. Unscrew the screws that secure the front lid and remove it.
2. Disconnect the board: disconnect all terminal blocks on the terminal board (see Fig. 3).
3. Divide the parts according to their type and dispose of them according to the laws in force.
ATTENTION!
Do not disperse the components and any other material of the product into the environment.
Consult authorised consortia for the disposal and recycling of materials.
