IS 193 ECN 3607
Page 9 of 10
Part Number
Description
Used on
OA7905
Floor stand
OE7205
OA7914
Floor stand
OE7206, OE7209
OA7906
Splashguard
OE7205
OA7916
Splashguard
OE7206, OE7209
Fig 3
To fit the appliance to the floor stand proceed as follows:
Measure the spacing between the legs of the appliance front to back. Remove the
legs.
Position the 4 spacer tubes over the mounting holes in the frame side channels -
Fig 3 (A). Use the back holes and the distance measured to define which of the
front holes is appropriate.
Place appliance on top and insert 4 M10 x 50mm socket screws through the
mounting holes from the underside of the frame, aligning them with the nuts in the
appliance base from which the legs have been removed.
Tighten screws until the appliance pulls up onto the spacer tubes.
ACCESSORIES
