IS 193 ECN 3607
Page 7 of 10
detergent and water.
Rinse away all traces of detergent and dry plate. Protect with a light coating of
cooking oil.
For heavy deposits, a de-greasing agent
‘Carbon-Off’ is available from Lincat.
General cleaning
Clean all panels with warm water and mild detergent, do not use abrasive materials
or cleaners containing chlorine. Dry with a soft cloth.
Empty and clean the fat collection drawer regularly.
SERVICING, MAINTENANCE AND
COMPONENT REPLACEMENT
All servicing, maintenance and component replacement on this appliance should be
carried out by one of our recommended service engineers.
Neon replacement
Remove the screws beneath the facia panel, and remove the facia panel by rotating
the bottom forward.
Remove the cables from the neon. Unscrew the neon retaining collar to remove the
neon.
Reverse the sequence to fit new neon and reassemble.
Contactor replacement
Remove the facia panel as above. Position the new contactor adjacent to the old
contactor and transfer the cables one at a time to ensure correct wiring.
Remove old contactor, fit new one and reassemble facia.
Element replacement
(OE7205 has 2 elements; OE7206 & OE7209 has 1 element on RH bank and 2
elements on LH bank).
Remove the facia panel as above. Remove the cables including earth tag from the
faulty element.
The elements are contained in a cartridge, which may be lowered for access.
Unscrew the M10 nuts of the cartridge strap almost to the bottom of the bolts
– this
will allow the cartridge to hinge down at the front.
