LIN 32D1700, Руководство пользователя

Страница: 13 / 40

13
Using your TV
Some options may not be available for
certain signal sources.
Selecting menu language
You can choose your preferred menu
language following the instructions below.
1. press
on the remote control, select
System > Menu language > Language
and press OK to enter.
2. Press o select your desired language
to display the menus and press OK to
3. Press EXIT or to close the menu.
Instant power on
This function enables you to turn on your TV
quickly.
1. press
on the remote control, select
System > Instant power on and press OK
to enter.
2. Press to select On and press OK to
3. Press EXIT or to close the menu.
Setting up your favourite channels
You can create a list to your favourite TV
channels.
1. Press
CH LIST .
2. Press the red button to enter Select
channel list , press to select a list
and press OK to enter.
3. Press to scroll through the
channel list and press the green button to
add the selected channel to your favourite
list.
4. Repeat this procedure to set up other
favourite channels.
5. Press the red button to enter Select
channel list , select Favorites and press
OK to enter.
6. Press to select a channel,
press OK to watch it or press the green
button to remove it from your favourite list.
7. Press CH LIST or EXIT to exit.
is.
Dolby Digital when the programme's
sound format is Dolby Digital.
PCM when the programme's sound
format is MPEG.
- If you select PCM , the SPDIF output format
is PCM, regardless of the programme's
sound format .
- If you select Off , this turns off the audio
output from the audio device connected to
the SPDIF output.
Note: The options you may choose depend
on the programme you are watching. If
the sound is ahead of the picture, you can
select SPDIF delay from the Sound menu,
press OK then press
to adjust the
delay time to synchronize the sound with
the picture.
Timer
You can access the time from digital channels
following the instructions below.
1. press
on the remote control, select
S y s t e m > T i m e r > C l o c k > A u t o
synchronization
and press OK to enter.
2. Press to select On and press OK to
3. Press EXIT or to close the menu.
and press OK to enter. Press to select