Limpar 72 Скачать руководство пользователя

Страница: 34 / 39

Page 34 of 39

05/19/2010

Limpar 72

Bowden cables for traction drive and brush drive

Press down the switch lever for traction drive.

You must be able to push down the switch lever to the

steering arm handle with light resistance.

Release the switch lever for the traction drive.

The switch lever must spring back into its original position.

Repeat the procedure with the switch lever for the brush

drive.

Have the repair performed by your specialist dealer if one

or both switch levers are hard to move or do not spring

back into their original position.

Bowden cable of the fuel control lever

Place the fuel control lever on “Max”.

Place the fuel control lever on “Min” and in this process

observe the counter lever on the carburettor (see the

operating manual provided by the motor manufacturer in

the sub-package of the sweeping machine).

You must be able to move the fuel control lever with light

resistance. The counter lever on the carburettor must follow the

executed movement.

Have the repair performed by your specialist dealer if the

Bowden cable does not function as described above.

Maintenance and repair

Содержание 72








































Результаты поиска

Содержание 72

Отзывы:

Похожие инструкции для 72

Бренды по названию

Популярные бренды

Limpar 72, Руководство по эксплуатации

Результаты поиска

Содержание 72

Отзывы:

Похожие инструкции для 72

Бренды по названию

Популярные бренды