Page 12 of 39
05/19/2010
Limpar 72
1.8 Safety regulations and accident prevention
regulations
Comply with the following instructions to avoid injury and material
damage. In addition, for commercial use comply with the safety
and accident prevention regulations issued by the Employers
Liability Insurance Associations.
•
Only operate the sweeping machine with properly mounted
safety devices and protective devices (see section 1.7).
These devices may only be dismounted for maintenance and
repair tasks. After concluding these tasks the safety devices
and protective devices must be immediately remounted.
Otherwise there is significant danger of injury.
•
Only use the sweeping machine for its intended use,
otherwise dangerous situations can occur with serious or
fatal injuries as the result (intended use: see section 1.1).
•
Due to poor lighting conditions during operation a number of
dangers can occur. Only operate the sweeping machine if
there is adequate lighting.
•
For sweeping tasks along walls there is danger of hand
scrape injuries. Avoid touching the walls with your hands and
wear protective gloves.
•
Maintenance and repair tasks may only be executed by the
specialist dealer or by specialised personnel.
•
High voltage on the ignition cable and spark plug connector!
Always switch the sweeper off with the fuel control lever,
before performing tasks on the ignition cable or spark plug
connector.
•
Comply with the instructions on the safety stickers that are
located on the sweeping machine. Safety stickers must not
be removed. If they have become illegible or have been lost,
they must be replaced (meaning of the stickers: see
section 1.10). Contact your specialist dealer to order new
stickers.
•
Wear tight-fitting clothing. Long hair must be tied back.
Safety
