Page 2 of 39
05/19/2010
Limpar 72
Introduction
Dear reader,
This operating manual provides all information for safe
operation of the Limpar 72 sweeping machine.
The Limpar 72 sweeping machine has been designed and built
in accordance with the state of the art and recognised safety
rules and regulations. Nevertheless dangers for personnel or
objects can occur, because not all danger zones can be
avoided if the functionality is to remain intact. However you can
prevent accidents due to these dangers by complying with the
instructions in this operating manual. Moreover you will then be
able to use the sweeping machine to its full capacity and avoid
unnecessary disturbances.
CAUTION!
There is danger of injury and danger of material damage when
assembling, operating, and maintaining the sweeping machine.
Therefore:
•
First read this operating manual carefully, prior to assembly
and operation of the sweeping machine. Always comply with
the instructions and information contained herein, particularly
the safety instructions.
•
If the operating manual is lost or in poor condition, request a
new copy from the manufacturer (the same applies for parts of
the operating manual).
This operating manual only applies for the sweeping machine
specified on the cover sheet and at the end of every page.
Compare this information with the information on the type plate
of the sweeping machine.
After you have read the entire operating manual thoroughly for
the first time, take good care of the operating manual over the
entire service life of the sweeping machine, so that you can look
up something later.
If you sell the sweeping machine, give this operating manual to
the new owner.
All information, illustrations and dimensions in this operating
manual are non-binding. No claims whatsoever can be derived
from this information, illustrations or dimensions.
Introduction
