Lilliput OWON VDS6000 Series Скачать руководство пользователя страница 7

Страница: 7 / 58

７

To avoid body injury, and to avoid device damage, its accessory or communicated facility damage, before
working the device, Lilliput strongly recommend to read the following safety information.

Warning

To avoid any potential short circuit or electric shock, DO use original local standard, or manufacturer’s

recommended power adapter.

Warning

The channels of the device is non-isolated electrically. When working the device, to avoid short circuit, the

ground of two probes are NOT allowed to connect to 2 different non-isolated DC level.

The illustration of the device’s built-in ground wire connection -

When the device communicated with PC via USB communication interface (with PC powered by AC

power source), the illustration of the ground wire connection -

It is NOT allowed to measure AC power when the device been powered by AC power source through the

adapter, or when the device powered by PC through USB connection cable (via USB communication

interface of PC, with PC powered by AC power source).

Содержание OWON VDS6000 Series



























































Результаты поиска

Содержание OWON VDS6000 Series

Отзывы:

Похожие инструкции для OWON VDS6000 Series

Бренды по названию

Популярные бренды

Lilliput OWON VDS6000 Series, Руководство пользователя

Результаты поиска

Содержание OWON VDS6000 Series

Отзывы:

Похожие инструкции для OWON VDS6000 Series

Бренды по названию

Популярные бренды