5
www.liko.com
Uno 100/102 • 7EN150104-01
Assembly Instructions
4.
Connect cables as follows:
- Cable handcontrol to outlet 1.
- Cable motor for lift mast to outlet
2.
- Cable Motor for base-width adjustment to outlet 3
(only mod. EE, ES).
1. Remove the locking handles from the base and
place the lift mast in the socket on the base.
• Lift mast with lift arm, control box, motor/actuator
for lift mast, flexlink, locking handles and slingbar
• Base (incl.
motor for base-width adjustment for
mod. EE, ES)
•
Lever for base width adjustment (mod. EM only)
Before assembly, make sure you have the following parts:
• Handcontrol with cable
• Battery pack and holder for cable
• Bag containing Instruction Guide, cable for char
-
ging (with connection cable for charging) and the
decal "Using the lift".
3.
Using the accompanying locking handles, secure
the lift mast in the desired position in the base.
Adjust the handles so that they point downward.
2. The lift height can be adjusted at three different
levels.
Select one of the three holes, as shown in
the illustration above.
The middle hole is recom
-
mended in most cases. The bottom hole on the
mast is recommended when a greater lifting height
is desired. The upper hole is recommended when a
lower lifting height is desired.
The distance between two holes is 50 mm (2 inch.).
See Measurements, page 4.
