Lika SMAX-AI1-PRG-L2, Руководство пользователя

Страница: 37 / 84

SMAX MODBUS®
the text of the label is coloured yellow. For more information refer to the
Watchdog enable
parameter on page 66.
Execute preset
This button allows to activate the preset function in order to set the output
value to the value entered next to the
Preset value
parameter (see on page 35).
The
Execute preset
button executes the whole sequence of preset setting
commands: activation of the
Perform counting preset
bit and registers setting;
deactivation of the Perform counting preset bit and registers setting; save of
parameters. While the commands are being executing, the background of the
button is coloured orange and the decimal value which results from the binary
sequence of the sixteen bits in the
Control Word [000A hex]
register is
updated in real time in the field under the label. As soon as the operation is
carried out, the value in the
Current position
field is the same as the value
entered in the
Preset value
parameter (you are not required to press the
Read
params
button in order to refresh the current position value). For more
information refer to the
Perform counting preset
parameter on page 67.
Upload defaults
This button allows to activate the function meant to upload the default
parameters. It executes the whole sequence of default parameters upload
commands: activation of the
Load default parameters
bit and registers
setting; deactivation of the
Load default parameters
bit and registers setting;
save of parameters). While the commands are being executing, the background
of the button is coloured orange and the decimal value which results from the
binary sequence of the sixteen bits in the
Control Word [000A hex]
register is
updated in real time in the field under the label. As soon as the operation is
carried out, the value in the parameter is updated automatically (you are not
required to press the
Read params button in order to refresh the values that are
currently set). For more information refer to the
Load default parameters
parameter on page 67.
WARNING
The execution of this command causes all parameters which have been set
previously to be overwritten!
Auto save
It enables / disables the autosave function.
If the
Auto save
check box is selected, all parameters of the Holding registers
are stored automatically and instantaneously as soon as they are set: check box
settings are saved as soon as the check box is selected / deselected; the write
MAN SMAX MB E 1.2 Quick reference 37 of 84