SMAG + MTAG SSI
- minimize noise by connecting the shield or the connector housing to ground.
Make sure that ground is not affected by noise. The connection point to
ground can be situated both on the device side and on user’s side. The best
solution to minimize the interference must be carried out by the user;
do not stretch the cable; do not pull or carry by cable; do not use the cable
as a handle.
1.3 Mechanical safety
Install the device following strictly the information in the “3 – Mechanical
installation” section on page 9;
mechanical installation has to be carried out with stationary mechanical
devices;
do not disassemble the unit;
do not tool the unit;
delicate electronic equipment: handle with care; do not subject the unit to
knocks or shocks;
protect the unit against acid solutions or chemicals that may damage it;
respect the environmental characteristics declared by manufacturer;
we suggest installing the unit providing protection means against waste,
especially swarf as turnings, chips, or filings; should this not be possible,
please make sure that adequate cleaning measures (as for instance brushes,
scrapers, jets of compressed air, etc.) are in place in order to prevent the
sensor and the magnetic scale from jamming.
MAN SMAG GA E 1.3.odt
1 – Safety summary
7 of 20
