Lika IF50, Руководство пользователя

Страница: 15 / 40

IF50
8 - Actual counter state readout via serial port
You can read out the actual counter state and further values at any time using a
serial connection. A personal computer is required to set the communication
parameters.
IF50 uses the DRIVECOM communication standard according to ISO 1745.
Details about this protocol can be found in the file Serial Protocol x.pdf which is
available for download from Lika Electronic website.
The following register codes are available for readout:
C1 C2 Description
: 8 Actual conversion result, scaled as % of full scale output, format xxx.xxx % *)
; 0
Actual count of input A
; 4
Actual count of input B
; 3
Actual output voltage of the analogue output, scaling 0 – 10 000 mV
*) Under consideration of the scaling operands as shown in the section “11.1 Register < :8 >
settings“ on page 58.
MAN IF50 I_E 1.0.odt 8 - Actual counter state readout via serial port 55 / 80