Lika IF50, Руководство пользователя

Страница: 18 / 40

IF50
11 - Parameter settings
11.1 Register < :8 > settings
Multiplier
Divisor
Offset
These operands are used to convert the result into any other engineering units
like millimetres or inches etc. These operands only affect the serial readout from
register < :8 >, not the scaling of the analogue output.
When settings are:
Multiplier
= 1,0000
Divisor
= 1,0000
Offset
= 0,0000
the readout from register < :8 > equals to the percentage result (xxx.xxx%),
where 100,000% has been defined by the
Teach Minimum
and
Teach
Maximum
settings.
Readout from < :8 > =
Measuring result in % of the
full scale
x
Multiplier
+
Offset
Divisor
NOTE
When
Divisor
is set to 0 the whole conversion will be skipped, resulting in lower
calculation time and the shortest possible conversion time.
The calculation resulting from [
Multiplier / Divisor ] must not exceed 15 000!
MAN IF50 I_E 1.0.odt 11 - Parameter settings 58 / 80