LiGo DORO COMFORT 3005, Инструкция по установке и эксплуатации

Страница: 6 / 21

English
Wall mounting
The phone can be wall mounted.
WARNING
Make sure that no cables, water pipes or gas pipes are located inside the wall before drilling
into it.
1. Drill two holes in the wall, vertically 102 mm mm apart.
2. Insert the screws, allowing them to project ~5 mm out from the wall.
3. Unplug and remove the handset.
4. Position the phone so that the screws on the wall fit into the slots in the bracket, then
slide the phone downwards until it is hanging on the screws.
5. Activate the hanging peg (located by the hook switch) by rotating it 180 degrees.
6. Replace the handset, on the hanging peg, in the hook switch.
Operation
The display
In standby mode the date and time is indicated on the display, the total number of calls that
have been stored in the Call list memory, and the number of new calls.
Note!
There are separate logs for answering machine and Caller ID and separate red LED’s. In order to
stop the flashing LED the corresponding log must be reviewed.
Tip:
You can always press to return to standby.
Making a call
Regular dialling
1. Lift the handset.
2. Enter desired phone number.
Pre-dialling
Allows you to enter and change a phone number before it is dialled.
1. Enter desired phone number. Mistakes can be deleted using
c
.
2. Lift the handset.
Redialling
Last dialled phone numbers can easily be dialled again.
1. Repeatedly press
r
to scroll through the dialled numbers.
2. Lift the handset to dial the number,
or lift the handset and then press
r
to dial the most recently dialled number.
Handsfree dialling
1. Press , handsfree function is activated.
2. Enter desired phone number.
2