LiGo DORO COMFORT 3005, Инструкция по установке и эксплуатации

Страница: 14 / 21

English
Remote control commands
Command Function
1#
Play new messages
2#
Play all messages
During playback:
3#
Erase single message during playback
4#
Skip to previous message
5#
Stop playback
6#
Skip to next message
After playback:
7#
Switching the answering machine on and off
8#
Record a new outgoing message, to stop recording press
5#
9#
Record a MEMO, to stop recording press
5#
0#
Room monitoring (active for 2 minutes and 30 seconds, press
0#
to continue)
Note!
If the machine doesn’t respond correctly to the remote control commands, try pressing the
phone keys for a longer or shorter time. If you do not enter any remote control command, the
answering machine will disconnect after a few seconds. If you listen to any incoming messages
for more than 2 minutes and 40 seconds, you will hear two beeps. Press any key to continue.
Remote activation
The answering machine can be activated using the remote control functions.
1. Call up the answering machine. After approximately 10 rings, the machine will answer
and emit a long tone.
2. Enter the PIN CODE during your outgoing message. If the code is accepted, you will
hear two short beeps.
3. Press
7#
. One beep confirms that the answering machine is now on. Replace the
handset.
Room monitoring
This remote access feature enables you to call your home and turn ON the answering
machine’s microphone function, allowing you to monitor sounds in the room where the
answering machine is situated.
Out of memory
The total capacity of the answering machine’s memory is approximately 40 minutes. The
memory space is shared between the outgoing message, personal memos, and regular
incoming messages.
10