manualshive.com logo in svg

Lightware UBEX-MMU-X200, Руководство пользователя, Страница: 237 / 253

Поделиться
Скачать
Lightware UBEX-MMU-X200 Скачать руководство пользователя страница 237

 

14. Appendix 

series – Matrix Application Mode – User's Manual 

237

 

14. Appendix 

series – Matrix Application Mode – User's Manual 

237

MA

TRIX  APPLIC

A

TION  MODE

Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4

Endpoint (v1.5.0b8)
New feature:

 

▪

Extended Identify Me feature to RJ45 ports

 

▪

Added support for cropper on secodary video pipe

 

▪

Added Compatible property to SFP nodes

 

▪

Added home screen to LCD menu

 

▪

Added local input loopback and copy features to RX mode

 

▪

Added support for automatic video freeze on signal loss as a NoSync option

 

▪

Added copy feature to TRX mode

 

▪

Added support for manual video freeze

 

▪

Added support for Dark Mode

 

▪

Updated video processing latency calculations (fixes tearing and flickering issues in some setups)

 

▪

Added processing latency property to video pipes

 

▪

Added support for altering Color Range

 

▪

Added overall Health Status properties

Bugfix:

 

▪

Fixed video tearing when converting between 60 and 24 Hz

 

▪

Fixed a glitch with EDID caching

 

▪

Fixed a glitch with HDMI outputs after operation mode change (TX/RX/TRX)

 

▪

Fixed a glitch with TMDS clocks between 310 and 340 MHz (e.g. 3440x1440p60)

 

▪

Fixed artifacts with video wall at 4K60

 

▪

Fixed HDMI audio node 'Connected' state

 

▪

Improved support for newer SFP+ standards (OM3/OM4 and copper lengths)

 

▪

Fixed a glitch that could cause an additional delay of one frame

v1.2.2b1

Release date: 2020-01-30

New feature:

 

▪

Added new version of Endpoint's firmware (v1.4.2b4)

 

▪

The embedded web supports to force HDCP 2.2 Type 1 Content on outputs.

Endpoint (v1.4.2b4)
New feature:

 

▪

Added option to force HDCP 2.2 Type 1 Content on outputs

Bugfix:

 

▪

Fixed glitches with settings storage and factory defaults restoration

 

▪

Improved support for updating devices that are already in service mode

v1.2.1b1

Release date: 2019-12-04

Bugfix:

 

▪

Added new version of Endpoint's firmware (v1.4.1b2)

Endpoint (v1.4.1b2)

Bugfix:

 

▪ Fixed a glitch with input scaler configuration storage

 

▪

Optimized runtime memory usage

v1.2.0b9

Release date: 2019-11-27

Bugfix:

 

▪

Added the built-in Endpoint firmware version (v1.4.0) for the Centralized Firmware Update.

 

▪

Fixed some issues (backup, settings storing, status messages, MDNS support) and improved the 

stability.

 

▪

The Centralized Firmware update function is fixed. This feature is working from the installed MMU 

firmware v1.1.0 and Endpoint firmware v1.3.1 and available for the later firmware package versions.

 

▪

IP settings limitation is fixed. The 10.0.0.0/8 IP range is fully supported in the MMU IP settings.

 

▪

After upgrading the MMU cannot be downgraded to versions prior to v1.2.0.

 

▪

Fixed some UI bugs and performance issues. Fixed Tile view.

Endpoint (v1.4.0b4)
New feature:

 

▪

Added check to refuse downgrading to earlier versions

Bugfix:

 

▪

Added file system in order to cope with bad NAND flash blocks

 

▪

Improved stability for multicast update

 

 

Содержание UBEX-MMU-X200






























































































































































































































































Отзывы:

Нет отзывов