manualshive.com logo in svg

Lightware UBEX-MMU-X200, Руководство пользователя, Страница: 236 / 253

Поделиться
Скачать
Lightware UBEX-MMU-X200 Скачать руководство пользователя страница 236

 

14. Appendix 

series – Matrix Application Mode – User's Manual 

236

 

14. Appendix 

series – Matrix Application Mode – User's Manual 

236

MA

TRIX  APPLIC

A

TION  MODE

Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4

v1.1.0b6

Release date: 2018-06-25

New feature:

 

▪

Source locked mode is now supported.

 

▪

Scaling and frame rate conversion are also supported on transmitter side.

 

▪

The frame rate converter and scaler modules support image cropping in case of downscaling in center 

image position.

 

▪

12-bit deep color HDMI signals can be transmitted in 10 bit mode.

Bugfix:

 

▪

4K60 4:4:4 and 4K30 4:4:4 signals can be passed through at the same time.

 

▪

SCDC registers are only modified, if the connected display supports this protocol.

v1.0.1b4

Release date: 2018-05-14

14.5.2. Matrix Management Unit (MMU)

Valid for the following model:

 

▪

UBEX-MMU-X200

v1.3.3b2

Release date: 2020-11-03

New feature:

 

▪

UBEX System Configurator updated to the latest version, v1.0.1b1.

 

▪

Added new version of endpoint firmware (v1.5.2).

 

▪

Added new version of embedded web (v2.1.0).

 

▪

Added new version of endpoint firmware (v1.5.4b1).

Bugfix:

 

▪

Async Command resender queue implemented to ensure the failed commands resend.

 

▪

We have updated the factory EDID list.

Endpoint (v1.5.4b1)
New feature:

 

▪

Added 3840x2400p60_reduced timing to scaler

Bugfix:

 

▪

Fixed a glitch with static IP settings storage

 

▪

Fixed the inconsistency of factory default network settings on RX devices

 

▪

Fixed a regression in EOL testing

 

▪

Fixed the video timing and audio bug. 

v1.3.2b1

Release date: 2020-09-01

New feature:

 

▪

Added new version of endpoint firmware (v1.5.2).

Endpoint (v1.5.2b1)
Bugfix:

 

▪

Fixed a compatibility issue with older LDU2 releases

 

▪

Fixed reliability problems with the HTTP server component

 

▪

Fixed an issue with pre-v1.4.0 migration support

 

▪

Fixed flash storage support that caused boot loops on some devices 

v1.3.1b1

Release date: 2020-06-03

New feature:

 

▪

Added new version of embedded web (v2.0.1) and endpoint firmware (v1.5.1).

Endpoint (v1.5.1b1)
Bugfix:

 

▪

Fixed a bug with IR reception 

v1.3.0b6

Release date: 2020-05-13

New feature:

 

▪

Support video freeze function.

 

▪

Support the dark mode function in the endpoints.

 

▪

Support the HDCP 2.2 Type 1 forcing function in the endpoints.

 

▪

The LLDP information of endpoints added to log.

 

▪

Copy function (RX, TRX) and local inputs in RX added.

 

▪

Added new Endpoint firmware (v1.5.0) and new embedded web (v2.0.0)

 

 

Содержание UBEX-MMU-X200






























































































































































































































































Отзывы:

Нет отзывов