background image

www

.lightware.co.za     •     info@

lightware.co.za

SF02/F

SF02/F

Laser rangefinder 

Product manual

SF02/F Laser Rangefinder - Product Manual - Revision 10 

 of 

© LightWare Optoelectronics (Pty) Ltd, 2016

1

17

The SF02/F is a lightweight laser 

rangefinder module that provides fast 

and accurate distance measurements.  

The module comprises all the 

necessary optical and electronic 

components along with embedded 

software for a pulsed laser, time-of-

flight, distance measuring 

instrument. 

Its configurable features and 

standard hardware interfaces make 

the SF02/F an easy to understand 

module that can be used in 

unmanned aerial vehicles (UAV), 

radio-controlled aircraft and robots. 

Digital and analog interface ports 

make the SF02/F the ideal module 

for experimenters.

Features:

A laser-based rangefinder module suitable for 
many applications.

Accurately measures the distance to natural 

surfaces and objects.

Can detect surfaces and objects up to a distance 
of 50 meters, even in bright sunlight.

Measures distance at 32 readings per second.

Includes digital and analog interfaces with 
programmable capabilities.

Easy to configure using the built-in menus and 

LightWare Terminal

 software.

Fully calibrated and ready to run.

Affordable for the student or hobbyist.

Robust and reliable.

Not affected by: wind; changes in barometric 
pressure; noise; ambient light; terrain or air 
temperature.

Содержание SF02/F


















Отзывы: