background image

 

7. LW3 Programmers’ Reference

 

 RAP-B511 series

 

– User's Manual 

60

7.14. 

Sending Message via the Communication Ports

7.14.1. 

Sending Message via TCP Port

The device can be used for sending a message to a certain IP:port address. The three different commands 

allow controlling the connected (third-party) devices.

7.14.1.1. Sending a TCP Message (ASCII-format)

The command is for sending a command message in ASCII-format. This method allows escaping the control 

characters. For more information see the 

Escaping 

section.

Command and Response

 

Ý

CALL·/MEDIA/ETHERNET:tcpMessage(

<IP_address>

:

<port_no>

=

<message>

)

 

Ü

mO·/MEDIA/ETHERNET:tcpMessage

Example

 

Ý

CALL /MEDIA/ETHERNET:tcpMessage(192.168.0.103:6107=C00)

 

Ü

mO /MEDIA/ETHERNET:tcpMessage

The 'C00' message is sent to the indicated IP:port address.

Example with HEX codes

 

Ý

CALL /MEDIA/ETHERNET:tcpMessage(192.168.0.20:5555=C00\x0a\x0d)

 

Ü

mO /MEDIA/ETHERNET:tcpMessage

The 'C00' message with CrLf (Carriage return and Line feed) is sent to the indicated IP:port address. The 

 

\x sequence indicates the HEXA code; see more information in the 

Using Hexadecimal Codes

 section.

7.14.1.2. Sending a TCP Text (ASCII-format)

The  command  is  for  sending  a  text  message  in  ASCII-format. This  method 

does not allow

 escaping or 

inserting control characters. 

Command and Response

 

Ý

CALL·/MEDIA/ETHERNET:tcpText(

<IP_address>

:

<port_no>

=

<text>

)

 

Ü

mO·/MEDIA/ETHERNET:tcpText

Example

 

Ý

CALL /MEDIA/ETHERNET:tcpText(192.168.0.103:6107=pwr_on)

 

Ü

mO /MEDIA/ETHERNET:tcpText

The 'pwr_on' text is sent to the indicated IP:port address.

7.14.1.3. Sending a TCP Binary Message (HEX-format)

The command is for sending a binary message in Hexadecimal format. This method 

does not allow

 escaping 

or inserting control characters.

Command and Response

 

Ý

CALL·/MEDIA/ETHERNET.tcpBinary(

<IP_address>

:

<port_no>

=

<HEX_message>

)

 

Ü

mO·/MEDIA/ETHERNET:tcpBinary

Example

 

Ý

CALL /MEDIA/ETHERNET:tcpBinary(192.168.0.103:6107=0100000061620000cdcc2c40)

 

Ü

mO /MEDIA/ETHERNET:tcpBinary

The '0100000061620000cdcc2c40' message is sent to the indicated IP:port address.

INFO: There is no need to insert a space or other separator character between the binary messages.

7.14.2. 

UDP Message Sending via Ethernet

The device can be used for sending a message to a certain IP:port address. The three different commands 

allow controlling the connected (third-party) devices.

7.14.2.1. Sending UDP Message (ASCII-format)

The command is for sending a UDP message in ASCII-format. This method allows escaping the control characters. 

For more information see the 

Escaping 

section.

Command and Response

 

Ý

CALL·/MEDIA/ETHERNET:udpMessage(

<IP_address>

:

<port_no>

=

<message>

)

 

Ü

mO·/MEDIA/ETHERNET:udpMessage

Example

 

Ý

CALL /MEDIA/ETHERNET:udpMessage(192.168.0.103:6107=C00)

 

Ü

mO /MEDIA/ETHERNET:udpMessage

The 'C00' message is sent to the indicated IP:port address.

Example with HEX codes

 

Ý

CALL /MEDIA/ETHERNET:udpMessage(192.168.0.20:9988=C00\x0a\x0d)

 

Ü

mO /MEDIA/ETHERNET:udpMessage

The 'C00' message with CrLf (Carriage return and Line feed) is sent to the indicated IP:port address. The \x 

sequence indicates the HEXA code; see more information in the 

Using Hexadecimal Codes

 section. 

Содержание RAP-B511-EU-K










































































Отзывы: