7. LW2 Programmers' Reference
MX2-HDMI20 series – User's Manual
73
Applied firmware package: v1.7.0 | LDC software: v2.5.1b5
8.4.8. Unmute Specified Output
Unmute the
<out>
output.
#unmute
Command and Response
ȩ
{+
<out>
}
Ȩ
(0MT
<out>
)CrLf
Example
ȩ
{+01}
Ȩ
(0MT01)
INFO:
Unmuting an output makes the previous connection active as the crosspoint state has not been
changed by the muting command, only the output was disabled.
8.4.9. Lock Specified Output
Locking an output port. Output’s state cannot be changed until unlocking.
#lock
Command and Response
ȩ
{#>
<out>
}
Ȩ
(1LO
<out²>
)CrLf
Example
ȩ
{#>01 A}
Ȩ
(1LO01 A)
8.4.10. Unlock a Specified Output
Unlocking an output port. The connection on output can be changed.
Command and Response
ȩ
{+<
<out>
}
Ȩ
(0LO
<out>
)CrLf
Example
ȩ
{+<01}
Ȩ
(0LO01)
O1 video output port is unlocked.
The device issues the above response regardless of the previous state of the output (either it was locked
or unlocked).
8.5.
Preset Handling
8.5.1.
Load a Preset
Recall a saved preset.
#preset
Command and Response
ȩ
{%
<preset>
}
Ȩ
(LPR
<out>
)CrLf
Example
ȩ
{%Mtgroom1}
Ȩ
(LPRMtgroom1)
Preset called "
Mtgroom1
" has been loaded and applied.
