Lighttoys Visual Poi V4, Руководство пользователя

Страница: 12 / 15

12
Latest Firmware
To enjoy the latest features and fixed bugs, make sure to check our page: https://lighttoys.cz/ft-new/
which lists the most up-to-date firmware files and instructions on how to update them.
Troubleshooting
“The Visual Poi has problem registering in LtComposer3 or the memory banks don’t behave
properly.”
It seems the memory got corrupted and it must be completely reset. If you are running
firmware version 0.32 or newer, turn off the VPOI4 with the long press of the main button, continue
to hold it for 10 seconds, when you see the white light on the first LED, release the button and
immediately click it again, then wait for the progress bar to finish. Video tutorial explaining the
process:
https://www.youtube.com/watch?v=fLailLGYTqo
“ The Visual Poi is displaying a static line of pixels and cannot be turned off. ” The Visual poi needs to
be reset. Locate the hidden reset pin on the Visual Poi circuit board, on the right side of the USB
connector. Get a thin metal object, a needle or paper clip works the best. Then touch the USB
connector and the reset pad, both at the same time:
Visual Poi reset procedure
The LEDs should stop shining, indicating the Visual Poi was reset. Turn the Visual Poi on with the
main button and it should work again normally.
Taking photos & videos of Visual Poi
Taking photos
Capturing beautiful photos like the ones you see on our webpage is actually not very difficult, once
you have the right equipment and know what to do!
For optimal results, get a DSLR camera and a solid tripod. The type of camera is not so important, the
only requirement for it is to have full manual mode (“M” mode).