Section 5
App / Cloud Setup
App / Cloud setup
The iTimer also acts as a gateway between the iSymphony App and the lighting con-
trollers in your garden.
Usually no setup is required, this aspect should be plug & play. Where non-standard
network configurations or security the inhibit the plug&play system, the iTimer and
App’s settings may be edited manually.
Normally, App and iTimer must be connected to the
same
local WiFi network for
the initial setup. When the App is launched it
performs a network broadcast (on UDP port
10000), to discover the iTimer’s IP address.
If this fails for any reason, the iTimer’s IP
address can be found by navigating to the
Network Settings page;
If necessary, these settings can be set manually via the iTimer’s web portal by
browsing to its IP address, 192.168.0.232 in the above example
The default password is;
Username:
admin
Password:
admin
Do not adjust these settings
unless you understand them!
To restore all settings and
security to factory default
power-on while holding the
UP and DOWN keys pressed
for 10 seconds.
NETWORK SETTINGS
IP: 192.168.0.232
MAC: 54-10-ec-fc-24-13
Healthy (DHCP)
BACK
