6
DMX Control
Initial Address Set-Up
In menu settings screen (Figure 3) press button B and select DMX Set-
up. Then press E again to open the DMX address screen. Adjust the start
address with the dimming knob by turning it.
DMX Status
In DMX Setup display press button B to select DMX Switch. Press E and
adjust value with the dimming knob. Press M to get back to the menu
screen.
DMX Channels
The start address is CH1 - below 100 = OFF, above 100 = ON (lamp)
Start a1 is CH2 - it is used for brightness adjustment ranging from
50% to 100%. Start a2 is used for controlling the frequency:
Figure 5 - DMX Screen
DMX Setup
M
MENU
UP
DOWN ENTER
A
B
E
DMX Address
DMX Switch
DMX Value (8-bit)
Output Frequency (Hz)
0 - 50
50
51 - 100
60
101 - 150
75
151 - 200
300
201 - 255
1000
Start a3 is used for 1000Hz fine tuning. DMX Value 0 - 255
Содержание LIGHTMAN 25 EB
Страница 1: ...LIGHTMAN 25 40 EB User Manual...
Страница 2: ...User Manual Version 23 Dezember 2021 3 52 PM Lightstar Lights info lightstar lights com...
Страница 12: ......