LightProcessor QCOMMANDER REPLICA, Инструкция по эксплуатации

Страница: 7 / 22

QCommander Replica English, Français, Deutsch, Español
Page 5
NOTES ON USING MIDI
To enable MIDI you must first ensure that option 03 is set to MIDI. Then set option 05 to ON if you
wish to use MIDI out.
The Replica sends MIDI OUT only on MIDI channel 0.
By default the Replica receives MIDI on channel 0, although it can receive on any channel 0-15. To
setup which channel the Replica will receive, use option 06. To setup the Replica to receive on any
MIDI channel 0-15 (omni on), use option 07.
The Replica’s 64 output keys are used to send and receive MIDI. See diagram 2 at the end of this
manual for details of send and receive music and MIDI notes. Option 15 allows you to offset the MIDI
note map, i.e. the first button on the Replica does not have to be note 0.
Outputting a MIDI note by pressing a key will activate the same numbered key on any QCommander
or Replica receiving MIDI IN on that channel (whatever the contents of the receiving key might be). It
is therefore possible to use multiple QCommanders and Replicas as a Master and Slaves.
FOR EASE OF REFERENCE THE MENU STRUCTURE OF THE REPLICA IS SET OUT IN
DIAGRAM NO. 3 AT THE END OF THIS MANUAL.