LightPointe FlightLite 100 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 59

background image

Copyrights and Disclaimer



2004, LightPointe Communications, Inc. All Rights Reserved

Information in this document is provided in connection with LightPointe
Communications, Inc. (LightPointe) products as a service to our customers and may be
used for information purposes only. LightPointe assumes no responsibility for errors or
omissions in these materials. LightPointe may make changes to specifications and
product descriptions at any time, without notice. LightPointe makes no commitment to
update the information and shall have no responsibility whatsoever for conflicts or
incompatibilities arising from future changes to its specifications and product
descriptions.

No license, express or implied, by estoppel or otherwise, to any intellectual property
rights is granted by this document. Except as provided in LightPointe’s Terms and
Conditions of Sale for such products, LightPointe assumes no liability whatsoever.

THESE MATERIALS ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, RELATING TO SALE AND/OR USE OF LIGHTPOINTE PRODUCTS
INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR
PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR
INFRINGEMENT OF ANY PATENT COPYRIGHT OR OTHER INTELLECTUAL PROPERTY
RIGHT. LIGHTPOINTE FURTHER DOES NOT WARRANT THE ACCURACY OR
COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED
WITHIN THESE MATERIALS. LIGHTPOINTE SHALL NOT BE LIABLE FOR ANY SPECIAL,
INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT
LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE
OF THESE MATERIALS.

LightPointe products are not intended for use in medical, lifesaving or life sustaining
applications. LightPointe customers using or selling LightPointe products for use in such
applications do so at their own risk and agree to fully indemnify LightPointe for any
damages resulting from such improper use or sale.

FlightLite



, FlightPath



, FlightSpectrum



, FlightStream



, FlightPower



, FSO



,

FlightStrata



, FlightApex



and FlightManager



are trademarks of LightPointe.

Product names or services listed in this publication are for identification purposes only,
and may be trademarks of third parties. Third-party brands and names are the property
of their respective owners.

LightPointe believes the printed matter contained herein to be accurate from date of
publication and reserves the right to make changes as necessary without notice

Reader Response:

LightPointe strives to produce quality documentation and welcomes

your feedback. Please send comments and suggestions to LightPointe. For technical
questions, contact your local LightPointe sales office or field applications engineer, or
visit our website at www.lightpointe.com.

«
1
2
3
4
...
»

Содержание FlightLite 100




























































Отзывы:

Нет отзывов

Похожие инструкции для FlightLite 100

Бренд: Panasonic Страницы: 92

Бренд: Panasonic Страницы: 16

Бренд: Yaesu Страницы: 12

Бренд: Karel Страницы: 55

Бренд: Clockaudio Страницы: 11

Бренд: Sennheiser Страницы: 10

Бренд: Nady Systems Страницы: 12

Бренд: Lewitt Страницы: 15

WIreless Microphone and Controller

Бренд: SEON Страницы: 3

Бренд: dB Technologies Страницы: 32

Бренд: Crown Страницы: 2

MXL010 VUQUBE AUTO

Бренд: Maxview Страницы: 20

Бренд: AEA Страницы: 16

Бренд: AEA Страницы: 8

Бренд: Hitachi Страницы: 35

Бренд: Hitachi Страницы: 33

Бренд: Hitachi Страницы: 40

Бренд: Hitachi Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды