LightPointe FlightLite 100, Руководство по установке и обслуживанию

Страница: 13 / 59

FlightTransport Installation Guide
505-016300-00000 Rev A 1-5
1.2. Laser Safety
LightPointe optical systems use semiconductor lasers as transmission
sources. You must be aware of corresponding laser safety regulations
and take the necessary precautions to avoid close direct exposure to
the laser beam. The infrared laser beam is invisible and has the
potential to penetrate to the retina and cause thermal damage.
The FlightLite optical laser communication systems use a Class 1M
laser in accordance with the international laser safety standard IEC/EN
60825-1 A2:2001.
Familiarize yourself with laser safety regulations and strictly enforce all
necessary precautions.
Warning: Do not look directly into the laser aperture from a
short distance. Never use any optical instruments to
view the laser beam.
When using the built-in telescope, you must be aware of the
appropriate safety distance (refer to Table 1-2). For distances below
the safety distance the operator must wear appropriate eye-protective
laser safety glasses. These distances assume an exposure of more
than ten seconds.
Table 1-2: Safe Distances for Telescope Operation
Link head Naked Eye safety
distance
Telescope* safety
distance
FlightLite 100 /
100E
0 0
*Internal telescope contains a safety filter
Caution: Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
Caution: This is a Class 1M Free Space Optical
Communication System (FSOCS) transmitter and
may be installed in
unrestricted, restricted or
controlled locations. For additional details, please
refer to IEC 60825: SAFETY OF LASER PRODUCTS
Part 12: Safety of free space optical communication
systems used for transmission of information.