LightPointe FlightLite 100, Руководство по установке и обслуживанию

Страница: 14 / 59

FlightTransport Installation Guide
1-6 505-016300-00000 Rev A
Unrestricted locations are those areas that are normally accessible to
the public (e.g., unrestricted areas of rooftops, public areas at ground
level, open areas of offices and industrial premises, etc.). To install a
LightPointe Communications FSO system in an unrestricted location,
the link head must be installed 3 meters high or higher above the
surface of the unrestricted area or must be 1 meter or closer to the
edge of the unrestricted area. If a LightPointe Communications FSO
system is installed in an unrestricted area, a warning sign must be
posted that states “ Do not use binoculars, telescopes or other
optical aids to view the FSO link heads.”
Restricted locations are those areas that are normally inaccessible by
the general public (including workers, visitors, and residents in the
immediate vicinity) by means of any administrative or engineering
control measure but that is accessible to authorized personnel (e.g.
maintenance or service personnel including window cleaners in exterior
locations) that may not have laser safety training. There are no
special requirements for a LightPointe Communications FSO system
installed in a
restricted area.
Controlled locations are those locations where any kind of engineering
or administrative control measure is introduced to make it inaccessible
except to authorized personnel with appropriate laser safety training
(e.g., tower-mounted terminals, fenced/secure areas of rooftops,
locked rooms with strictly-controlled access, etc.). There are no
special requirements for a LightPointe Communications FSO system
installed in a
controlled area.
The laser system shall be installed in accordance with ANSI Z136.1
control measures (engineering, administrative, and procedural
controls).
1.2.1. Laser Safety Labels
All relevant labels are affixed to the inside of the link head near the
laser aperture.
The warning labels are affixed to the outer shell of the link head.
Caution: Do not modify this certified laser product.