background image

-  3

-

Design FeAtures

A.  Speaker Connections:  Follow correct polarity, and do not Ground any speaker wires. Do not connect any speaker

wires together.

B. Pass Through Outputs: The Pass-Thru provides a convenient source for daisy-chaining an additional amplifier with-

out running and extra set of RCA cables from the front of the vehicle to the rear amplifier location.

C. Gain Control: The input gain control is preset to  match the output of most source units. They can be adjusted to

match output levels from a variety of source units.

D. Sub-Sonic Filter: Variable from 10-50Hz

E.  Adjustable Crossover Frequency Control: 50-250Hz.

F.

Juice Boost: Applies 0-12dB of 50Hz Bass Boost.

G.  Power Connector Plug: Connects Power, Ground, and Remote

H. Power Cell (Capacitor) Plug: Power Cell has 2 active leads for B+ and Ground

I.

Power Fuse: If this Fuse should blow, determine the cause or see your authorized dealer. Never replace the fuse with
one of greater value than the original

J.  RCA Input Jacks – Line Level from Radio Pre-outs: The industry standard RCA jack provides an easy connection

for signal level input. They are gold-plated to resist the signal degradation caused by corrosion.

Not Pictured:

K. Juice Boost Remote Module: The Juice Boost remote module has a Green “Operation” indicator and Red

“Protection” indicator. The Remote Juice Boost Module allows adjustment of the overall gain or volume of the
amplifier. It operates only when the crossover switch is in Low Pass position. It does not alter the frequency
response, but instead allows control of the overall gain of the amplifier driving your woofers. Most experienced
users adjust the Juice Boost knob on the amp for the maximum desired amount of bass boost, and then plug
in the module to control how much of that boost they want to unleash to their subwoofers.

FRONT VIEW

BACK VIEW

SPEAKER
OUTPUT

PASS
THRU

RIGHT

INPUTS

LEFT

GAIN

SUBSONIC

ON - OFF

CROSSOVER

JUICE 

BOOST

+12V

+12V

FUSE

REM

POWER

POWERCELL

A

B

C D

E

F

G

H

I

J

FRONT VIEW

BACK VIEW

SPEAKER
OUTPUT

PASS
THRU

RIGHT

INPUTS

LEFT

GAIN

SUBSONIC

ON - OFF

CROSSOVER

JUICE 

BOOST

+12V

REM

GND

+12V

FUSE

REM
GND

POWER

POWERCELL

A

B

C D

E

F

G

H

I

J

Sto r m

S1.1000D

Sto r m

S1.600D

Содержание Storm S1.1000D

























Отзывы: