Lighthouse RLPC 0.1m, Руководство по эксплуатации, Страница: 65 / 118

Programming with MR Protocol
248083227-1 Rev 8 6-11
Command:
d
{Configured using the ’ a ’ and ’ b ’ commands.
Start counting in Automatic or Manual Mode. In
automatic Mode, this command starts the count
- hold - count sequence and repeats
continuously. In Manual Mode, the count is
started and automatically stops at the end of
the Sample Interval.}
Response:
d
Command:
e
{ Stop counting immediately. The last data
record will show 0000 for its Sample Interval, as
the Sample Interval is controlled by the host.}
Response:
e