Lighthouse RLPC 0.1m, Руководство по эксплуатации, Страница: 47 / 118

Configuring with LWS ASCII Service Protocol
248083227-1 Rev 8 5-7
Example: Setting Date and Time
Note:
Remember to type
<V> first when first
entering the ASCII
programming mode.
The REMOTE instrument was preconfigured at the factory for Pacific
Standard Time (PST). To check the date and time on the instrument in
ASCII mode,
1. Type:
<gd>
This command displays the current date and time.
Response:
<gd> 2003-12-21, 11:10:49
To change the date and time, follow these instructions:
2. Change the Year <daYY>:
This command sets the year value with a 2-digit year
(YY).
Type:
<da04>
Response:
<da04> 2004-12-21, 11:10:55
3. Change the Month <dbMM>:
This command sets the month value with a 2-digit month
(MM); the range is 01 - 12.
Type:
<db01>
Response:
<db01> 2004-01-21, 11:11:24