Lighthouse A136-15-OB, Руководство по эксплуатации

Страница: 2 / 37

Document : LH-A136-15-OB-OPM-DR-1.00 Page 2 of 37 © Lighthouse Technologies Ltd.
HK: T +852 2192 1688 F +852 2423 1092 info@lighthouse-tech.com www.lighthouse-tech.com
WARNING
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT OPEN THE PANEL ACCESSIBLE DOORS WHEN
POWER IS ON.

Always ensure that the unit is properly earthed and power connections correctly made

This equipment must be supplied from a power system providing a PROTECTIVE EARTH connection and
having a neutral connection, which can be reliably identified

The power outlet supplying power to the unit should be close to the unit and easily accessible

Always remember to close and lock the panel access doors after servicing and before resuming the power
supply

Ensure whole system power off before connect or disconnect the net cable

Always remember to dry the panel fully before packing

Store in a dry and airy place

Suggest using below method to cleaning the Intelligent Modules (IM): Using electrostatic-proof soft-brush to
clean the IM per month to keep the LEDs clean. Clean with solvents is not allowed.

The picture in the manual just for reference, the actual subject to shipment product.

Electrostatic discharge may harm the surface of the LED units. To prevent such damage, you should
discharge static electricity from your body before you contact with the LED units.

The product must be installed in an environment out of human reach. If a person touches the product, its
performance may deteriorate. If the product needs to be installed in a place where human contact with the
product is likely, a separate measure to prevent people from touching it needs to be taken.

[Caution to prevent damage to the LED from static] Do not touch the product without anti-static gloves.
RISK OF ELECTRIC SHOCK
DO NOT OPEN DOORS WHILE THE
EQUIPMENT IS REMAINING ON
NO USER SERVICEABLE PARTS
REFER SERVICING TO QULIFIED
PERSONNEL ONLY