Lighthouse Worldwide Solutions REMOTE 5104V, Руководство по эксплуатации

Страница: 69 / 78

00
248083293-1 Rev 7 B-1
B
Maintenance
Safety
Considerations
Warnings and cautions are used throughout this manual. It is the
responsibility of the user to familiarize themselves with the meaning of
a warning before operating the particle sensor. All warnings will appear
in the left margin of the page next to the subject or step to which it
applies. Take extreme care when doing any procedures preceded by or
containing a warning.
Routine
Maintenance
Routine maintenance activities should be established by the end-user
and may include cleaning of the exterior of the instrument and
checking of the status LEDs.
No other routine activities are suggested by the manufacturer at this
time. The manufacturer recommends that a Lighthouse instrument be
calibrated annually by a Certified Lighthouse Service Provider to
ensure that the unit continues to perform within specification.
There are no user-serviceable components within the instrument and
opening it is strongly discouraged.
THIS EQUIPMENT IS SUITABLE FOR USE IN CLASS
I
,
DIVISION 2, GROUPS A, B, C & D OR NON-HAZARDOUS
LOCATIONS ONLY.
Laser Safety
Information
This product contains a Laser-based sensor that is a Class I when used
under normal operation and maintenance conditions. Servicing
procedures on the sensor can result in exposure to invisible radiation.
Service should be performed only by factory-authorized personnel.
The particle counter has been evaluated and tested in accordance with
ISA-82.02.01 2
nd
Ed., July 2004, "Safety Requirements For Electrical
Equipment for Measurement, Control, and Laboratory Use" and ANSI/
ISA-12.12.01-2000, "Nonincendive Electrical Equipment for Use in
Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous
(Classified) Locations. See Figure B-1.