Lighthouse Worldwide Solutions REMOTE 5104V, Руководство по эксплуатации

Страница: 28 / 78

Lighthouse REMOTE 5104V Operating Manual
3-4 248083293-1 Rev 7
Procedure
1. Strip 1-1/2-inch to two-inches of insulation from the end of the
cable, taking extreme care to not nick or cut the individual wires.
Do NOT strip the individual wires.
2. Remove the contents of the Industrial RJ45 connector from the
package - do NOT dispose of or lose any pieces. Compare the
contents with Figure 3-1. Contact Lighthouse Support if it appears
that something is missing from the package.
Figure 3-1 R5104V RJ45 Cable Parts
3. Remove the large lock ring from the housing if they are mated.
4. Loosen the smaller sealing nut to allow the CAT5e cable through.
5. On the instrument end of the cable, push the stripped end of the
cable through the large Lock Ring and RJ-45 housing as illustrated
in Figure 3-2. Make sure the ring is oriented as shown. If it is
reversed, the cable may have to be cut, the RJ45 connector
discarded and a new connector installed.
Figure 3-2 Housing with Cable Inserted
Wire
Loom
RJ45
Lock
RJ45
Connector
Seal
CAT5e Cable
Lock
Ring
RJ45 Housing