Lighthouse Worldwide Solutions REMOTE 5104V, Руководство по эксплуатации

Страница: 42 / 78

Lighthouse REMOTE 5104V Operating Manual
4-2 248083293-1 Rev 7
DIP Switch General Definitions
Table 4-1 displays the general DIP Switch settings. OFF (LEFT) = 0,
ON (RIGHT) = 1.
Note:
Use a tool with a
very small, pointed tip in
order to change the DIP
Switch positions.
Table 4-1 DIP Switch settings
Communication Modes
The communication mode used for the REMOTE 5104V is MODBUS
protocol mode. See Table 4-2.
OFF (LEFT) = 0, ON (RIGHT) = 1
The DIP Switches must be set before the unit is powered up. If the DIP
Switches are changed, power cycle the instrument to implement the
change.
Position
#
Description Setting
1 Binary Bit 0 Addressing, OFF=0, ON=1
2 Binary Bit 1 Addressing, OFF=0, ON=1
3 Binary Bit 2 Addressing, OFF=0, ON=1
4 Binary Bit 3 Addressing, OFF=0, ON=1
5 Binary Bit 4 Addressing, OFF=0, ON=1
6 Binary Bit 5 Addressing, OFF=0, ON=1
7 Communication
Mode
Used in conjunction with DIP
switch 8 to set MODBUS mode
8 Communication
Mode
Used in conjunction with DIP
switch 7 to set MODBUS mode
Table 4-2 DIP Switch Communications Mode
COMMUNICATIONS MODE
DIP
SW 7
DIP
SW 8
MODBUS protocol OFF OFF